Manual Leakage Tester For Aerosol Can Checking-Can Inspection Equipment
This Leak Tester for Aerosol can is used for testing the leakage of Aerosol cans. It can test 6 cans at the same time. The permeability tester for aerosol cans blows up the cans up to a maximum of 10 bar and submerges them under water. At the leaking spots of the can then visible air-bubbles escape.
Advantages
● Cans are freely suspended in the water, no extra clamping force
● Simple clamping device, takes only 1 second to clamp or take off the cans
● Clamping independent from can diameter
● Pneumatic simply controlled by the handle to make the cans dip in or lift out of the water
● End and side seams visible
● Able to rotate the cans when pressurizing
Technical Parameter
● Air source pressure : 1.0 Mpa
● Max. testing pressure : 1.0 Mpa
● Resolution : 0.05 Mpa
● Sample : Aerosol Cans
● Flume size : L1200*W590*H800mm
● Dimensions : L1200*W650*H800mm
● Can Dia. : 25.4mm (Also applicable for 15.0mm)
